Anonymous

Parts Cleaning

The all purpose forum for any TR7/8 related topics.
Post Reply
The Old One
Scuttle Shaker
Posts: 81
Joined: 20 Sep 2009 17:58
Location: United Kingdom
Contact:

Parts Cleaning

Postby The Old One » 25 Nov 2010 18:00

Whats best for cleaning internal engine parts?
(we do not have a dish washer apart from myself lol)
Is strong detergent any good?

Cheers
Tony

staningrimsby
TRiffic
Posts: 1507
Joined: 15 Jul 2007 20:23
Location: United Kingdom
Contact:

Postby staningrimsby » 25 Nov 2010 18:18

What is it you are trying to clean Tony [?]

ImageImageImage

1980 2.0 DHC (soon to be 16v) - Polly.

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 25 Nov 2010 18:23

I use the machine shop a couple of miles from the house. He usually says no charge, but I slip him a couple pound notes any way.

Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants

The Old One
Scuttle Shaker
Posts: 81
Joined: 20 Sep 2009 17:58
Location: United Kingdom
Contact:

Postby The Old One » 25 Nov 2010 18:32

[quote]<i>Originally posted by staningrimsby</i>

What is it you are trying to clean Tony [?]

Hi Stan
All internalls,block,head crank etc basically
everything.Its mainly to get all the old cruddy
oil off everything.

Cheers
Tony

PS
By the way hows the swap going?

staningrimsby
TRiffic
Posts: 1507
Joined: 15 Jul 2007 20:23
Location: United Kingdom
Contact:

Postby staningrimsby » 25 Nov 2010 19:18

Ah i see, i would not know what to suggest to be honest.

I have a parts washer in the garage, the missus got fed up of me using the dishwasher.

The top of the parts washer opens up you pop everything on like a wire mesh tray, then its gas mark 4 for 20mins per lb + 20 mins.[:D]

ImageImageImage

1980 2.0 DHC (soon to be 16v) - Polly.

staningrimsby
TRiffic
Posts: 1507
Joined: 15 Jul 2007 20:23
Location: United Kingdom
Contact:

Postby staningrimsby » 25 Nov 2010 19:19

As for bits you can reach Tony i prefer to connect the old parrafin gun to the compressor and that works wonders.[:)]

ImageImageImage

1980 2.0 DHC (soon to be 16v) - Polly.

Vegas_M
Swagester
Posts: 504
Joined: 25 May 2005 03:02
Location: Canada
Contact:

Postby Vegas_M » 25 Nov 2010 19:31

Get a large bucket or other container.
Fill to suitable level with boiling water and tide detergent (or other strong laundry detergent).
Insert parts and let soak for 10 min or so. Helps if you have somehting to keep the water hot.
Wearing your wifes rubber dish gloves, scrub vigorously with a stiff bristled brush.
Rince and pat or blow dry.

Works great.

M.

FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 25 Nov 2010 21:06

I've got a commercial parts washer (given to me when I left my last employer) that uses a low VOC solvent. When it is too oily/dirty (dirt actually settles out and you can empty it and wipe out the dirt in the interm) I call the solvent company and they come and take it away to refurbish it and give me refurbished stuff. Last time it was $20 (years ago). Enviromentally correct. You can buy a 20 gallon parts washer with motor and hose that will do for most stuff for reasonable money and get the parts washer stuff from them. I'm not sure what it is but it's pretty benign.

TR7 Spider - 1978 Spitfire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT
Image

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 25 Nov 2010 22:13

I like to leave the dirty stuff somewhere else. That's why I take it somewhere.Only takes about an hour.Blocks to the smallest bit.

Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 26 Nov 2010 01:01

I use half a 5 gallon drum, cut from top to bottom, giving a half round wash tub, petrol & a paint brush. Always gets everything spotless, except for baked on carbon. No water, no air, no mess.

For carbon I have a very low tech decarbonising bath. A 5 gallon drum with a clip on top. This has 3 gallons of decarboniser, with a gallon of pasified water seal on top, to stop evaporation, & a basket from an old deep fryer, long departed. Overnight in that, & even pistons from 300,000 Km cars come up shiny.

Hasbeen

PS, I use pipe cleaners for running through things like oil ways in cranks, in the petrol bath.

trekcarbonboy
Swagester
Posts: 940
Joined: 18 Oct 2010 15:38
Location: USA

Postby trekcarbonboy » 26 Nov 2010 01:52

WOW! People use their dishwasher to clean engine parts! My wife would kill me. Cracks me up when I see posts with pics of parts sitting on the kitchen counter.

Bucket and a brush works for me.

Craig
Image

RadioGuy
Swagester
Posts: 534
Joined: 10 Apr 2010 15:11
Location: USA
Contact:

Postby RadioGuy » 26 Nov 2010 09:20

Don't laugh, I acquired a used dishwasher from an apartment building that was being refurbished (actually two of them). I had one set up in the basement to clean what ever I needed. I filled it with a 50/50 mix of Purple Stuff/Purple Power what ever they call it these days and let it run, it heated the water mix and everything. I had the drain hose fed into a 6 gallon container, when the cycle was complete it pumped the mess into the container where the solids could settle. Then pour most of it back into the washer the next time it was needed, leaving the settlement in the bottom of the collection container. I could get 5 or 6 really dirty cleanings before I had to change the mix. The washer I had would fit a TR7 engine when I removed the top tray. Ok, it wasn't easy but we got it in there.

A good used dishwasher is the best cleaner a backyard mechanic can ask for[:)]. Just make sure you pull the parts as soon as they are clean, blow them dry and dip/paint them with oil ASAP because the degreaser does what it says and all your rust protection is gone![:0]

Alternately go to the local car wash and have at it with the high Pressure.

ImageImageImage
Maintained on Saturday…Drive on Fun-Day !!! 1976 FHC - 1980 DHC

FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 26 Nov 2010 14:51

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by RadioGuy</i>


Alternately go to the local car wash and have at it with the high Pressure.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Unfortunately can't do that here now as they forbid it (including washing engine in car like I used to). Too close to Salmon spawning grounds, shellfish beds and other marine life estuaries. Damn inconvenient this enviramental stuff. Not like the good old days.[:(]


TR7 Spider - 1978 Spitfire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT
Image

RadioGuy
Swagester
Posts: 534
Joined: 10 Apr 2010 15:11
Location: USA
Contact:

Postby RadioGuy » 26 Nov 2010 15:54

You may be able to ask around. Some shops will wash a block and parts for a reasonable price. Around here there are a couple of shops that rebuild engines. They will vat an engine and parts for less than $50.00 and a lot less if it's reasonably clean. One has a steam washer and the other uses a bio-degradable wash.

They like to see guys build their own engines, they are just like us and after you get to know them they might help with some machine work on the side for a cut rate price.[:)]

YMMV
Ken

ImageImageImage
Maintained on Saturday…Drive on Fun-Day !!! 1976 FHC - 1980 DHC

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 26 Nov 2010 17:15

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by RadioGuy</i>

<font size="2">You may be able to ask around. Some shops will wash a block and parts for a reasonable price. Around here there are a couple of shops that rebuild engines. They will vat an engine and parts for less than $50.00 and a lot less if it's reasonably clean. One has a steam washer and the other uses a bio-degradable wash.

They like to see guys build their own engines, they are just like us and after you get to know them they might help with some machine work on the side for a cut rate price.[:)]</font id="size2">

YMMV
Ken


<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Think I said that twice above.

I feel the same way Ken.
More apt to answer questions and do small task for you.
They also let me use their sand blasting cab. too.


Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants

Post Reply

Who is online

Users browsing this forum: No registered users and 381 guests

cron