Anonymous

To Scrap - or Spare?

The all purpose forum for any TR7/8 related topics.
Post Reply
Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

To Scrap - or Spare?

Postby Maxwell » 21 Jul 2010 23:02

Hi Guys

Here's the delimma. I need the space in the garage, but am unsure what to do with all the spare parts I've accumulated over the years.

Have eight plastic wheel trims [from an early FHC] any intrinsic value, or should I just bin them? They are of the large, dinner-plate variety that cover all the steel wheel.

What about four SU Carbs and manifolds - condition and parentage unknown? A clutch plate...?

A front bumper-iron from a 1980 Drop Head, a cracked center cover and two rubber side-light inserts that have gone 'baggy'?

What about two partly cannibalised 2.0l engines, neither of which have been heard running?

Is it just scrap - or a valuable asset for someone?

Advice needed, please!

Maxwell [;)]

catmanboo
Rust Hunter
Posts: 200
Joined: 01 May 2009 01:23
Location: USA
Contact:

Postby catmanboo » 22 Jul 2010 01:58

what side of the pond are you located? I'd like to acquire a stock carb/intake set-up, intact, for experimentation & comparison to the Mikuni dual-carb set-up my '76 fhc came with, provided it's accessible stateside. I wouldn't pitch ANY usable bits! they're not making any more of them![:0]whatever you think is junk, someone out there has a use for![:p]

Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Postby Maxwell » 22 Jul 2010 07:43

Regret I'm in the UK...

I know what you mean about not junking things, but my garage is four miles away, rented, and I need the space!

Maxwell

Red
Wedge Pilot
Posts: 447
Joined: 30 Sep 2005 07:47
Location: United Kingdom

Postby Red » 22 Jul 2010 07:56

Just put them on ebay, with a low start price and no reserve. Even if you end up selling the bits for 99p each, at least you'll know they've gone to someone that can use them, rather than being scrapped.
If you can't be bothered selling each bit individually, you can stick all the smaller bits in a box and sell it as a job lot - I've bought a couple of boxes of bits like this, which have yielded quite a few useful parts for me.

Garry

1976 2.0 (soon to be 3.5!)FHC
http://reds-tr7.blogspot.com/

nervousnewowner
TRiffic
Posts: 1607
Joined: 10 Oct 2008 20:15
Location: United Kingdom
Contact:

Postby nervousnewowner » 24 Jul 2010 23:05

where in uk are you maxwell?

ImageImage
the project at birth, watch it evolve...I hope...

Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Postby Maxwell » 25 Jul 2010 21:00

Hi

I'm in Mid-Kent....

Maxwell [8D]

Underdog
Wedgista
Posts: 1162
Joined: 13 Oct 2007 10:40
Location: USA
Contact:

Postby Underdog » 26 Jul 2010 21:39

Maxwell, I could tell you were from the UK. If you hang around here a while you notice the language difference. [:D] Plus the reference to a multi-piece bumper cover.

I hate tossing out stuff they don't make anymore. Hope you can find a good home.

Jim Underwood
72 MGB BRG
80 TR8 Persian Aqua
If women don't find you handsome, they should at least find you handy.

Post Reply

Who is online

Users browsing this forum: No registered users and 66 guests