Anonymous

Headlight Squeal

The all purpose forum for any TR7/8 related topics.
Post Reply
kermit
Rust Hunter
Posts: 146
Joined: 15 Sep 2006 19:57
Location: USA
Contact:

Headlight Squeal

Postby kermit » 19 Feb 2008 00:41

Today I was able to replace the headlight assembly that was not working with one that I had bought off fleabay 5 or 6 years ago. The motor on my original unit would not move and the manual knob would not raise the pod.

The good news... The pods now raise & lower together as they are supposed to [:D].

The bad news... The assembly that was replaced makes a squealing noise when the pods are switched to raise or lower. The noise is not coming from relays but from the assembly [B)].

Could it be the units need to be lubricated? If so, what type & brand of lubrication.

I am hoping that I didn't get screwed by the ebay seller.
Thanks

Thanks

80 TR7 DHC with ZS Carbs
Brooklands Green

Rich in Vancouver
Swagester
Posts: 781
Joined: 10 Jun 2007 15:20
Location: Canada
Contact:

Postby Rich in Vancouver » 19 Feb 2008 01:18

If it is going up and down you are well on your way. After having them sit for years I wouldn't be inclined to claim that the seller fleeced me either.
I would take a can of a quality lubricant (I use "Tri-Flow", Excellent stuff) and give all of the pivot points a good spray for two or three days in a row. If your noise is coming from dry joints that should help.

Good Luck,
Rich

1975 TR7 ACL764U
Image

TR Tony
TRemendous
Posts: 2882
Joined: 29 Oct 2004 13:38
Location: United Kingdom
Contact:

Postby TR Tony » 19 Feb 2008 10:34

I had this from one of my headlights a while ago. I used some spray grease on the moving parts of the mounting assembly & it has been quiet ever since.

Tony
Image
<font size="1">1981 2L FHC Cavalry Blue - very original & not rusty!
1980 3.5L V8 DHC Regency Red - on the road again.</font id="size1">

john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:

Postby john 215 » 19 Feb 2008 21:28

Hi,
One of mine got noisy a few years ago [V] i to used Tri Flow, at the time we were using at work for Rover 800 door barrels (tech bulletin rec using it) bl88dy great stuff.Could'nt find a supply over here for ages till i noticed some for sale in cycle shop! Apprently mountain bikers use the stuff, lubricates but crud does not tend to stick to it [^]
Cheers John

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)
Image
1982 2.0 DHC NOW A 4.6 WILL BE ON THE ROAD VERY SOON!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 19 Feb 2008 21:38

Gee kermit, if you're going to make a couple of TR7 head lights do
something they just hate doing, [go up & down, & do it together],
you've got to expect them to bitch about it, at least for a while.

Hasbeen

kermit
Rust Hunter
Posts: 146
Joined: 15 Sep 2006 19:57
Location: USA
Contact:

Postby kermit » 20 Feb 2008 01:24

Thanks guys... I went to my garage tonight and actually found a bottle of the triflow that I had bought many years ago for the chain on my mountain bike. The stuff worked really good on the bike. so good that the bottle was empty.

I will track some down and let you know if it does the trick.

Hasbeen - my tr tends to do a lot of bitchin [}:)]. Yet I still am obsessed with it...
Scott

80 TR7 DHC with ZS Carbs
Brooklands Green

Post Reply

Who is online

Users browsing this forum: No registered users and 169 guests